50 pin Ribbon Cables - SCSI-1, SCSI-2

	Place Order \| About Us \| Contact Us \| Sitemap

50-Pin Internal SCSI Cables

For SCSI-1, SCSI-2, Fast-20 and 8-bit (narrow) SCSI

Connector Styles



50-pin Card-Edge (CE50)	DB50 Female (D50S)	50-pin Maleplug (M50)	Female Centronics (C50)	50-pin 2-row Female (F50)	HD50 Female w/Adapter PCB (MDA)	HD50 Female Discrete-wired (MD)

Ribbon Cable Styles




Grey PVC 108 Ohm	Color-Coded 112 Ohm	Slit PVC (2.5" spacing) 105 Ohm	Twist-N-Flat Loose Pair 8" Spacing 115 Ohm	Teflon Ultra SCSI 100 Ohm

To Order:

Example: 26" 3-drive Centronics ends, standard ribbon cable

*To have protected mesh sleeving or heat-shrinking tubing added, please inform your sales representative

Connector Style

Length

Cable Style

Mounting
Plates

CE50 = 50-pin Card
      Edge
D50S = Female DB50
M50 = 50-pin Male
     Plug
C50 = Centronics
      Female
F50 = 50-pin 2-row
      Female
MDA = HD50 Female
      (w/Adapter PCB)
MD = HD50 Female
      (Discrete wired)

Length in inches between drive
connectors and connector designation.

* - Indicated connector is "DOWN"

** For dimensions other than inches, please specify

Blank = Grey P/C
(10) = Color Coded
(11) = Slit Grey (2 1/2" Spacing)
(13) = Twist-N-Flat (8" Spacing)
(14) = Teflon

Use part numbers listed below

Mounting Plates
Mounting plates are available to enable you to install internal cables into enclosures with either Centronics or DB50 cut-outs, or into PC style enclosures. To order internal cables with plates installed, add the following suffix at the end of the cable order number:
	-(1002) HD50 into Centronics or DB50
	-(1003) - "Off-set" HD 50 into Centronics
	-(1006) - HD50 into PC
	-(1005) - Centronics into PC
All mounting plates are $___ ea.


-1002	-1003	-1006	-1005

Flat Ribbon Cable Toroids

To further enhance the EMI/RFI properties of your internal SCSI cables, ribbon cable toroids are available.