CS Electronics
 
 
 
Fibre Channel Drive Adapters
CSE offers a variety of support products for your Fibre Channel Subsystems. 4Gb/s Optical Drive Adapters, Copper-to-Optical MIA's and SCA "T-Cards" to support several interconnects.


4 Gbs Single-Drive Fibre Channel T-Card Adapter
  • This drive adapter (interposer) supports 2 FC data channels @ 4gb/s.
  • (2) SFP ports for access by SFP transceiver (GBC-4400) and optical cable or use an SFP copper cable (see Fibre Channel Cables).
  • 40-pin SCA connection for plugging directly onto drive.
  • 4-pin power plug and jumpers provided.
  • This board does not support “loop resiliency.”
  • Dimension: 2.60 x 4.25.
*Click here to Learn More
 
Order #
FCA-4200
*Comes as a "stand-alone" board. See GBIC/SFP/MIA for SFP optical transceivers, and click for Fiber Optic Cables.
FCA-4200
Call for VAR/OEM Pricing


Copper-to-Optical Media Interface Adapter
*works in conjunction w/ FCA-2200K to provide SFP Optical output for longer length connections.

 
Order #

FCA-2500 w/ Bracket to mount in Centronics50 cut-out

*Comes with power cable as pictured. For Fibre Channel interconnect cables, see FIBRE CHANNEL CABLES.

Call for VAR/OEM Pricing
FCA-2500


2 Gbs Single-Drive "Low-Profile" FC Adapter 1”
Form Factor
  • This latest adapter has two independent FC-AL ports, each capable of 1062 MHz encoded data rate @ 2.125 gigabaud.
  • On-board Port Bypass Circuit (PBC) for convenient Hot Swappability of drive.
  • FC Coax Cable Driver implemented with high-speed ECL logic to drive long cable lengths.
  • <10ps jitter on FC input receiver and controlled impedance pcb for multiple interconnects.
  • Dimension: 1.03” x 3.80”
Order #
FCA-2200-K
*Comes as a "stand-alone" board. See FIBRE CHANNEL CABLES for internal cables for this unit.

Call for VAR/OEM Pricing
FCA-2200-K


Single-Drive "T-Card" Adapter - DB9 Interface
For single-drive FC subsystems. Ideal for bench-top testing of FC drives. Converts the SCA-40 drive connector to (2) DB9 female connectors for "Port A in/out" and "Port B in/out", a 28-pin drive setup header and 4-pin power plug. Dual-ported. No "Loop Resiliency" circuitry. 1 Gbs max.
 
Order #
FCA-3000
*Comes as a "stand-alone" board. See FIBRE CHANNEL CABLES for internal cables for this unit.

Call for VAR/OEM Pricing
FCA-3000


Single-Drive "T-Card" Adapter - PTP Interface
For single-drive FC subsystems. Ideal for bench-top testing of FC drives. Converts the SCA-40 drive connector to (4) 3-pin PTP connectors for "Port A in/out" and "Port B in/out", a 28-pin drive setup header and 4-pin power plug. Dual-ported. No "Loop Resiliency" circuitry. 1 Gbs max.
Order #
List Price
FCA-3500
*Comes as a "stand-alone" board. See FIBRE CHANNEL CABLES for internal cables for this unit.

Call for VAR/OEM Pricing
FCA-3500



HSSDC2 "Loop-Back" Adapter
For "looping-back" Tx & Rx signals on an HSSDC2 SFP Transceiver Module
 
Order #
FCA-1500
 
Call for VAR/OEM Pricing

 

FCA-1500


DB9 "Loop-Back" Adapter
Utilizes a custom-designed "impedance-matched" internal pc board for "looping-back" Tx & Rx signals.
 
Order #
FCA-1000
 
Call for VAR/OEM Pricing

 

FCA-1000


HSSDC "Loop-Back" Adapter
Utilizes a custom-designed "impedance-matched" internal pc board for "looping-back" Tx & Rx signals.
 
Order #
HSS-1000
 
Call for VAR/OEM Pricing

 

HSS-1000



More Fibre Channel Products

 

    
Home | Place Order | About us | Contact Us | Site Map | Copyright and Legal Notices | New Products
12G-RATED SAS Adapters | 12G-RATED SAS Cables | SAS Cables and Drive Adapters | iSAS Cables| SFP+ | QSFP+|
10Gb/s Ethernet Cables and Transceivers | Fibre Channel | Fiber Optic Cables | Optical Transceivers SFP-XFP-XPAK-GBIC-MIA | SATA I & SATA II Cables & Drive Adapters | Infiniband Cables | LVD / SCSI  

Copyright © 2001-2011 by CS Electronics, All rights reserved