| Serial
Attached SCSI (SAS) Cables
SAS is the next-generation interface standard
for SCSI-based systems, designed to replace the SCSI parallel
interface with much faster, more flexible, 3Gb/s Serial Interface
while maintaining the robust nature of the SCSI Command Set.
Mini-SAS ("CSE iSAS"), is the next generation of SAS
Cables. It uses smaller connectors with improved performance
and 6Gb/s Rated. They are now used on many new Controllers
and Backplanes being shipped today.
| Go to: |
 |
The flexibility of SAS facilitates many system-level configurations
such as workstations, blade servers, external storage arrays,
SAS Expanders, Host Bus Adapters (HBA's) and RAID
controllers.
 |
In the Marketplace for SAS and SATA products,
there has been considerable confusion in the use of the
terms straight-through and crossover cables. To alleviate
this confusion CSE has changed its part numbers and descriptions
to more clearly indicate the use of each cable.
|
|
EXTERNAL CABLES
(ALSO EXTERNAL/INTERNAL COMBINATIONS)
|
|
| EXTERNAL 4X CABLES |
 |
 |
Host-Based
Ext. 4X
SFF-8470
CSE 70 |
 |
| Order
# |
| SAS-7070/.5m |
| SAS-7070/1m |
| SAS-7070/3m |
|
 |
Target-Based
Ext. 4X
SFF-8470
CSE 70 |
| |
 |
 |
|
|
Note: Extension
wiring,(Corresponding Tx to Tx /Rx to Rx) is available
for
testing.
Add EX i.e.: SAS-7070-EX/Xm. Not defined by SAS-1.1
Spec. |
|
|
|
|
| EXTERNAL 4X AND
INTERNAL 7-PIN FANOUT CABLES |
|
|
Host-Based
Ext. 4X
SFF-8470
CSE 70 -R
|
 |
| Order
# |
| SAS-707P-R/.5m |
| SAS-707P-R/1m |
|
 |
Target-Based
(4) Int. 7-Pin SATA
Round Shielded Cable and Connector
CSE 7P -R |
| |
|
|
|
|
Host-Based
(4) Int. 7-Pin SATA
Round Shielded Cable and Connector
CSE 7P -R |
 |
| Order
# |
| SAS-7P70-R/.5m |
| SAS-7P70-R/1m |
|
 |
Target-Based
Ext. 4X
SFF-8470
CSE 70 -R |
| |
|
|
|
|
 |
|
|
| LOW PROFILE 4X
AND INTERNAL 7-PIN FANOUT CABLES |
|
|
Host-Based
Ext. 4X Low Profile, Latch
SFF-8470 (LP)
CSE 70L -F |
 |
| Order
# |
| SAS-70L7P-F/.5m |
| SAS-70L7P-F/1m |
|
 |
Target-Based
(4) Int. 7-Pin SATA
CSE 7P -F |
| |
|
|
|
|
Host-Based
(4)Int. 7-Pin SATA
CSE 7P -F
|
 |
| Order
# |
| SAS-7P70L-F/.5m |
| SAS-7P70L-F/1m |
|
 |
Target-Based
Ext. 4X Low Profile, Latch
SFF-8470 (LP)
CSE 70L -F |
| |
|
|
|
|
|
|
|
| EXTERNAL 4X AND
INTERNAL 4i MULTILANE CABLES |
|
|
Host-Based
Ext. 4X
SFF-8470
CSE 70
|
 |
| Order
# |
| SAS-7084/.5m |
| SAS-7084/1m |
|
 |
Target-Based
Int.
4i Multilane
SFF-8484
CSE 84 |
| |
|
|
|
|
Host-Based
Int. 4i Multilane
SFF-8484
CSE 84
|
 |
| Order
# |
| SAS-8470/.5m |
| SAS-8470/1m |
|
 |
Target-Based
Ext. 4X
SFF-8470
CSE 70 |
| |
|
|
|
|
|
|
|
| |
|
|
Host-Based
Int. 4i Right Angle
Multilane
SFF-8484 (RA)
CSE 84RA
|
 |
| Order
# |
| SAS-84RA70/.5m |
| SAS-84RA70/1m |
|
|
Target-Based
Ext. 4X
SFF-8470
CSE 70 |
| |
|
|
|
|
|
| EXTERNAL 4X TO
(4)29-PIN DRIVE CONNECTOR CABLES |
|
|
Host-Based
Ext. 4X
SFF-8470
CSE 70 -R |
 |
| Order
# |
| SAS-7082-R/.5m |
| SAS-7082-R/1m |
| SAS-7082-R/2m |
|
 |
(4) Target-Based
Dual Port 29-Pin
Drive Receptacle Connector
Round Black Cable w/Pwr
CSE 82 -R |
| |
|
|
|
|
|
|
|
6g sas cables
| INTERNAL SAS CABLES |
| |
| INTERNAL 4i MULTILANE |
|
|
Host-Based
Int. 4i Multilane
SFF-8484
CSE 84
|
|
| Order
# |
| SAS-8484/.5m |
| SAS-8484/1m |
|
|
Target-Based
Int. 4i Multilane
SFF-8484
CSE 84 |
| |
|
|
|
|
Host-Based
Int. 4i Right Angle
Multilane
SFF-8484 (RA)
CSE 84RA
|
|
| Order
# |
| SAS-84RA84/.5m |
| SAS-84RA84/1m |
|
|
Target-Based
Int. 4i Multilane
SFF-8484
CSE 84 |
| |
|
|
|
|
|
Ideal for use with: LSI SAS 3442X-R and LSI MegaRAID SAS 8308-ELP w/ 4i Multilane Target
|
|
|
|
| INTERNAL 4i MULTILANE AND INTERNAL 7-PIN FANOUT CABLES |
|
|
Host-Based
Int. 4i Multilane
SFF-8484
CSE “84” -F
|
 |
| Order
# |
| SAS-847P-F/.5m |
| SAS-847P-F/1m |
| |
|
|
 |
Target-Based
(4) Int. 7-Pin SATA
CSE “7P” -F |
|
|
|
Host-Based
Int. 4i Multilane
Right Angle
SFF-8484
CSE “84” -F
|
 |
| Order
# |
| SAS-84RA7P/.5m |
| SAS-84RA7P/1m |
| |
|
|
|
Target-Based
(4) Int. 7-Pin SATA
CSE “7P” -F |
|
|
|
| Ideal for use with: LSI SAS 3442X-R and LSI MegaRAID SAS 8308-ELP w/ 7-Pin Target |
Host-Based
(4) Int. 7-Pin SATA
CSE “7P” -F
|
 |
| Order
# |
| SAS-7P84-F/.5m |
| SAS-7P84-F/1m |
| |
|
|
 |
Target-Based
Int. 4i Multilane
SFF-8484
CSE “84” -F |
|
|
|
|
|
|
| INTERNAL 4i MULTILANE
to (4) 7-PIN SATA WITH SIDEBANDS |
|
|
Host-Based
Int. 4i Multilane
SFF-8484
CSE 84 -FSB
With Sidebands
|
 |
| Order
# |
| SAS-847P-FSB/30" |
| |
|
|
 |
(4) 7-Pin SATA and 10-Pin Sideband Connector
CSE 7P -FSB |
|
|
| Note: Sideband lines (6 wires) are for system management
(SES) and LED activity. |
Note: Sideband connector mates to Molex 70013, 70022 |
|
|
|
|
|
| SINGLE OR DUAL
HOST TO DRIVE CABLES |
| |
 |
| Order
# |
| SAS-7P82-1/.5m |
| SAS-7P82-1/1m |
| SAS-7P82-2/.5m |
| SAS-7P82-2/1m |
|
|
 |
|
|
|
Single or Dual Port Host Based 7-Pin SATA TO Target Based 29-Pin Drive
Receptacle w/ 6" Pwr Lead |
Note: Power Lead is .15m( ~6"), regardless
of Signal cable length. Optional lengths available
|
|
|
|
|
|
|
|
DRIVE CABLE FOR
TESTING
Drive Plug Connector |
(2) 7-Pin SATA w/ 6" Pwr Lead
|
 |
| Order
# |
| SAS-7P82-P/.5m |
| SAS-7P82-P/1m |
| |
|
|
 |
Drive Plug Connector
This will plug into a SAS Backplane as a Drive would |
|
|
Note: Power Lead is .15 (~6"), regardless of Signal cable length. Optional lengths available.
|
Note: This test cable has the same male connector
as a SAS Drive. It will plug into a backplane
for signal analyses. |
|
|
| |
SAS Drive Extension Cable (29-pin Male-to-Female) |
|
This is a fully-populated 2-Lane SAS Extension Cable.
Can be used to remotely locate a SAS drive for bench-top
evaluation, etc.
Extends SAS backplane connection.
Has 3.3v, 5v, and 12v power lines. |
| Order
# |
SAS-82M-82F/.5m |
SAS-82M-82F/1m |
|
| |
SAS 4X Female Panel-Mount connector interface |
|
(mates w/ SFF-8470 4X Male external connector) |
| Can be ordered with a variety of SAS or Mini-SAS connectors on the other end, and to any length. |
*Call today for pricing and availability |
|
|
|
| See SAS
Adapters for Drive Adapters (T-Cards) and Chassis
Adapters |
|
| See our complete
line of SATA Cables and Adapters: |
|
|
|
|
|
